Keeping the dehumidifier filter disinfect will prevent the coils from freezing

There is a lot of house service that is easy to overlook as a first time homeowner.

You should suppose to disinfect your windows at least once a year, however you might forget about your rain gutters and the importance of cleaning out any debris that accumulates.

If you have trees on your property, it’s important to disinfect your rooftop with a broom to remove any dead leaves or branches that could lead to rotting. These chores aren’t necessarily apparent to someone who hasn’t been taught about their significance from a parent or similar educator. If you buy a piece of technology that you’re not previously acquainted with, how are you supposed to suppose what to do unless you study the guidelines and have existing experience? I figured that owning a dehumidifier would be mostly straightforward. I knew that the bag needed to be emptied whenever it filled with water. Until I could find a drainage system with an exhaust hose, I simply emptied the internal bag twice a day. However, I was overlooking one key feature of our dehumidifier—the filter. I let the dehumidifier’s filter get blocked with dust and it was causing the evaporator coils to freeze over in low temperatures. I found this out after asking Heating & Air Conditioning specialists on an internet forum. After turning off the dehumidifier, I removed the filter and cleaned it in our big sink using diluted rubbing alcohol and a toothbrush. Since I do a lot of cooking, there are typically cooking oils in our air. They cause the dust in our filters to get sticky, which is easy to remove with the diluted rubbing alcohol. Once the dust is removed, I abruptly disinfect it with soap and water before putting it back in the machine.

click for more